Jailbreaks have been a bit lacking in recent years but today we can tell you that, if you are on iOS 10, we have news of a jailbreak for you. Its called Helix jailbreak, its semi-untethered and it was brought to us by Tihmstar, a prominent developer. It is a stable jailbreak and is based on an exploit called V0rtex.

iOS 10 was meant to be the beginning of the end for jailbreaking and, for a long time, it seemed to be. Apple introduced a load of new features, including security features that, for a while, interfered with the jailbreak development. So, given all the security that iOS 10 includes, how does Helix jailbreak work? Helix is built using an exploit that gets around the security features in iOS 10, allowing you free and easy access to Cydia. It is a safe jailbreak to use so read on to find out how to get it.

Supported iOS 10 Versions:

The following iOS 10 versions support the download of Cydia:

  • iOS 10
  • iOS 10.0.1
  • iOS 10.0.2
  • iOS 10.3.1
  • iOS 10.3.2
  • iOS 10.3.3

H3lix Jailbreak:

Helix aka H3lix jailbreak is available on both 32-bit and 64-bit devices. Do remember that it is semi-untethered so it will need reactivating whenever you restart your iPhone or iPad. Downloading it is simple though so check out the links to download and install Helix on either 32-bit or 64-bit devices.

Yalu Jailbreak:

Yalu was one of the first jailbreak tools for iOS 10 firmware. Yalu jailbreak was released by jailbreak developer Luca Todesco but it was not 100% compatible with all iOS 10 supported devices during its initial release. Also, Yalu Jailbreak was not one of the most stable of jailbreak tools. It was superseded by Helix jailbreak which comfortably jailbreaks all iOS 10 devices up until iOS 10.3.3.

Cydia is not available on all devices but, for those who can’t download it there is a huge choice of alternatives. Take a look at our list of alternatives, iOS app installers offering plenty of apps and games for free, including some of the top modified apps, like YouTube++, Instagram++, Spotify++, Snapchat++, MovieBox and many more, all offering extra features over the stock versions.

Jailbreaks have been a bit lacking in recent years but today we can tell you that, if you are on iOS 10, we have news of a jailbreak for you. Its called Helix jailbreak, its semi-untethered and it was brought to us by Tihmstar, a prominent developer. It is a stable jailbreak and is based on an exploit called V0rtex.

iOS 10 was meant to be the beginning of the end for jailbreaking and, for a long time, it seemed to be. Apple introduced a load of new features, including security features that, for a while, interfered with the jailbreak development. So, given all the security that iOS 10 includes, how does Helix jailbreak work? Helix is built using an exploit that gets around the security features in iOS 10, allowing you free and easy access to Cydia. It is a safe jailbreak to use so read on to find out how to get it.

Supported iOS 10 Versions:

The following iOS 10 versions support the download of Cydia:

  • iOS 10
  • iOS 10.0.1
  • iOS 10.0.2
  • iOS 10.3.1
  • iOS 10.3.2
  • iOS 10.3.3

H3lix Jailbreak:

Helix aka H3lix jailbreak is available on both 32-bit and 64-bit devices. Do remember that it is semi-untethered so it will need reactivating whenever you restart your iPhone or iPad. Downloading it is simple though so check out the links to download and install Helix on either 32-bit or 64-bit devices.

Yalu Jailbreak:

Yalu was one of the first jailbreak tools for iOS 10 firmware. Yalu jailbreak was released by jailbreak developer Luca Todesco but it was not 100% compatible with all iOS 10 supported devices during its initial release. Also, Yalu Jailbreak was not one of the most stable of jailbreak tools. It was superseded by Helix jailbreak which comfortably jailbreaks all iOS 10 devices up until iOS 10.3.3.

Cydia is not available on all devices but, for those who can’t download it there is a huge choice of alternatives. Take a look at our list of alternatives, iOS app installers offering plenty of apps and games for free, including some of the top modified apps, like YouTube++, Instagram++, Spotify++, Snapchat++, MovieBox and many more, all offering extra features over the stock versions.

Pangu 10 is first and only tool to jailbreak iOS 10.3.3 and you can Cydia download for the latest version using the Pangu 10 jailbreak. Pangu10 is developed by TeamPangu and Distributed freely. First Download iOS 10 using OTA update or through iTunes. We recommended you to update to the latest iTunes and update through iTunes. Then Backup your device with iTune or iColud and start the jailbreaking process. You can find detailed info about updating to latest firmware below.

Compatible Devices for Pangu 10 Jailbreak

All the device with iOS 10.3.3 is technically compatible with Pangu10 jailbreak .

iOS 10.3.3 Download via OTA update

Before starting the OTA update mechanism, you have to take a complete backup of your iPhone, iPad, and iPod Touch to keep your personal information safely. Go to Settings > General > Software Update and then you will be able to see the latest update on the screen. Tap on "Download and Install" button to go ahead with iOS 10.3.3 install . Then, enter your passcode and tap on "Agree" button twice to allow "Terms and Conditions". Finally, tap on "Install Now" button to install the latest firmware. The new update will automatically install on your device after a short while.

Note: Remeber that do not use OTA update if you"re willing to jailbreak iOS 10.3.3 then Cydia download because sometimes the jailbreaking mechanism won"t support with the over-the-air update.

iOS 10.3.3 Download through the iTunes

You can use iTunes update if there is no enough space to go ahead with the OTA update. And make sure you have the latest version of iTunes and take a complete iTunes backup before installing 10.3.3 version on your iDevice. Connect your device to your Windows PC or Mac using a certified lightning cable and launch the iTunes. Click on device icon at the top left corner and click on "Check for Updates" button. Then you have to click on "Download and Install" button to download the newly released update on your iPhone, iPad or iPod Touch. This is our recommended method for updating to the latest version.

Can I Jailbreak iOS 10.3.3 using Pangu

Pangu Team still haven"t a released a public jailbreak option for the . They are already working hard for a new tool because we couldn"t get new update from them recently. If you want jailbreak iOS 10.3.3 , we can give the best solution for the iPhone, iPad, iPod touch users who are searching for a solution to install Cydia.. Users will be able to install Cydia within a few steps. Remember that there is no other way to install iOS 10.3.3 Cydia.

iOS 10.3.2 Cydia Download

A software dveloper team named KeenLab has demoed iOS 10.3.2 and 11 jailbreak. Sometimes, they will publish the tool same as the way that Luca Todesco did. iOS 10.3.2 minor update is now available to the public iDevice users. Perhaps you know that iOS is possible at the moment. This is the one and only help for the newly released firmware. Just tap on "Cydia download" button from your iDevice and download Cydia iOS 10.3.2

How to jailbreak iOS 10.3.2 with Pangu10

If you"re searching for iOS 10.3.2 jailbreak and Cydia download, you have to know that still there"s no Public tool for jailbreak iOS 10.3.2 Pangu has already jailbroken iOS10(beta) and revealed this on the second Mobile Security Conference event which was held in Shanghai, China. Pangu showed a video demo to the visitors Cydia installer has already installed on iOS 10 running iPhone. We are planning to release the Pangu 10.3.2 jailbreak ASAP. We just have to do some testing with latest firmware release. You can download Pangu10 and follow simple instruction for Pangu10 jailbreak.

Pangu 10.3 Update - Jailbreak iOS 10.3

Still ,we do not have any public jailbreak tool for iOS 10.x. Stay tuned for latest iOS 10.3 public jailbreak update with pangu 10.3

Important Facts - Pangu Download

  • Pangu 10.3.3 is Still not public and not available for download
  • Currently, iOS 10.x jailbreak is only possible with Pangu Jailbreak. Do not use or pay for scam jailbreaking tools/sites.
  • Update iTunes for the latest version.
  • Use iTunes to update your device iOS version .
  • Perform Full backup using iCloud or iTunes.
  • Avoid iTunes or Apple device related activities when you use jailbreaking tools.
  • Disable Passcode or Touch ID , Turn Off “Find My iPhone”.

Fix common problems with Jailbreak - Pangu Troubleshoot

Pangu is an untethered jailbreak tool. No any malware or spyware threats. So everybody can use pangu jailbreak tool without any doubt. The process will not make any harm in your idevice system. You should use this on your own risk.

  • Temporarily disable any security software / Antivirus softwares
  • If you updated your idevice firmware through the OTA, please give fresh restore to your iDevice using iTunes. Do not forget that OTA update sometimes does not work with jailbreak concept.
  • If you failed on the Cydia download process several times, do not confuse about that. You can start the process again after rebooting your iPhone and computer.
  • Try switching on Airplane mode or restore your idevice using restore functionality.
  • Do not use your iPhone during the process.

Credits for Pangu10 jailbreak

Pangu10 is the first and only way to install Cydia for iOS 10. All the download links and Pangu jailbreak tutorials credits goes to official team.

Эксплоит на конференции по безопасности в Китае. Утилита будет доступна для владельцев 64-битных устройств на актуальной платформе. Поэтому сейчас самое время подготовить свой iPhone или iPad к выходу программы.

Разработчики из Pangu не назвали конкретные сроки релиза, однако анонс на таком большом мероприятии говорит о серьезных намерениях хакеров. По слухам, джейлбрейк iOS 10.3.1 выйдет уже на следующей неделе. MacDigger активно следит за джейлбрейк-трендами и наша обязанность – рассказать пользователям, для некоторых из которых iPhone и iPad стали их первыми «яблочными» гаджетами, как подготовиться к выходу джейлбрейка iOS 10.3.1.

Джейлбрейк - это интересный, но вместе с тем довольно сложный процесс. Если что-то пойдет не так, это может привести к проблеме в работе устройств.

Сделайте резервную копию через iTunes

Эта процедура должна производиться на регулярной основе, вне зависимости от того, собираетесь вы сделать джейлбрейк или просто обновить операционную систему. Подключение к iTunes и создание резервной копии вашего iPhone обеспечит сохранность ваших данных и возможность их восстановления при необходимости.


Обновитесь до iOS 10.3.1 (опционально)

Версия iOS 10.3.1 является актуальной на данный момент. Если на вашем устройстве установлена iOS 10.2.1, для которой не существует джейлбрейка, вам стоит обновиться до iOS 10.3.1. Если вы используете гаджет с iOS 10.2 с джейлбрейком, то вам лучше дождаться выхода утилиты от Pangu.

Сохраните SHSH2 blobs для iOS 10.3.1

Шаг 1 : Вам понадобится ECID-номер устройства. Его можно узнать, подключив аппарат к компьютеру и запустив iTunes. Скопируйте его в Блокнот, Word или любой другой текстовый редактор.


Шаг 2 : После того, как вы скопировали 16-значный номер, перейдите по следующей ссылке, чтобы получить доступ к TSS Saver: tsssaver.1conan.com .

Шаг 3 : В соответствующей строке вставьте скопированный ECID-номер.
Примечание: если для получения номера вы использовали не iTunes, а UDID Calculator, перед вводом нужно выбрать опцию «Dec» вместо «Hex» в соответствии с десятеричным форматом.

Шаг 4 : В поле «Identifier» выберите модель вашего устройства. В качестве примера используется iPhone 7 Plus, поэтому в первом столбце мы выбираем «iPhone», а во втором - «iPhone 7 Plus».


Если у вас iPhone 6s, iPhone 6s Plus или iPhone SE, сервису может потребоваться больше информации. Вам понадобится модельный номер устройства, который можно узнать через приложение BMSSM в App Store.

Если вы пользуетесь iPhone 7 или iPhone 7 Plus, вам нужно только знать, какая у вас модификация: GSM или Global. Подключив устройство к iTunes, несколько раз кликните на UDID, пока не отобразится идентификатор. В случае с iPhone 7 это 9,1 для Global и 9,3 для GSM, а с iPhone 7 Plus - 9,2 для Global и 9,4 для GSM.

Шаг 5 : Отметьте галочкой пункт «Я не робот».

Шаг 6 : Нажмите кнопку Submit, чтобы получить ссылку для загрузки сертификата.

Подпишитесь на MacDigger

MacDigger следит за новостями джейлбрейка, поэтому у нас вы узнаете все подробности о появлении общедоступного инструмента для взлома, ссылки на загрузку, инструкции по использованию программного обеспечения и способы решения возможных проблем в случае их возникновения. Следить за новостями можно на сайте или в нашей группе .

Дождитесь джейлбрейка

Выполнив все необходимые действия, вы можете ждать джейлбрейка для iOS 10.3.1. Пожалуй, это самая сложная часть. Хотя есть вероятность, что эксплоит задержится, его релиз стоит ждать в самое ближайшее время. Подписывайтесь на

Last Updated: 2019-01-03

Cydia Jailbreak on iOS 10.3.3

The long awaited jailbreak, iOS 10.3.3, h3lix is now released for jailbreak lovers. This is compatible with 32-bit devices and is semi untethered in nature which means that you need to rejailbreak your iOS device each time you reboot it. Credits go to tihmstar for the tremendous efforts made towards finding latest jailbreak for 10.3.3 which has been for months, a real headache for iOS jailbreak community.

There are 2 methods mainly to install H3lix.

  1. Using TaigOne - Online method(No computer needed)
  2. Direct download - Computer method

Step by Step Guide for installing iOS 10.3.3 jailbreak (computer method)

  1. Download this ipa https://h3lix.tihmstar.net/
  2. Download Cydia Impactor as it suits to your PC Operating system (OS). http://www.cydiaimpactor.com/
  3. Open Cydia Impactor and connect your iDevice to PC
  4. Drag the downloaded ipa to Cydia Impactor launcher
  5. Enter Apple ID and continue
  6. Wait until it is done
  7. Enjoy the successful result

Other than this lengthy process we have a one click sure method to install H3lix. Want to hear that? It is TaigOne, the online method mentioned previously.

TaiG released Jailbreak app installer for iOS 10.3.3 and for many more naming TaigOne

TaigOne provides Jailbreak apps for your iOS 10.3.3 . Most popular Jailbreak applications can be installed with the compatibility for iOS 10.3, 10.3.1, 10.3.2, 10.3.3 and frankly saying, for all iOS versions.

Install TaigOne

A trusted way to install Jailbreak apps for up to iOS 10.3.3.

TaigOne

Compatible iOS versions

  • iOS 10.3
  • iOS 10.3.1
  • iOS 10.3.2
  • and other lower and higher versions
Compatible device models
  • iPhone 8 & iPhone X
  • iPhone 7 & 7 Plus , iPhone 6S & 6S Plus ,iPhone 6 & 6 Plus.
  • iPhone SE / iPhone 5s , iPod Touch 6G.
  • iPad Mini 2 / iPad Mini 3 / iPad Mini 4.
  • iPad Air /iPad Air 2 /iPad Pro.

Step guide for TaigOne


iOS 10.3.3 Jailbreak is not a dream anymore with H3lix. H3lix means jailbreaking the device. May be some of us do not want a jailbreak but they need those amazing jailbreak apps and Cydia most. We have the perfect solution for those.
That is TaigOne . This is a jailbreak alternative app which can be used to install Cydia on iOS 10.3.3. This app allows hassle free installation with zero risk for all jailbroken and non jailbroken devices.
Moreover, this provides most suitable jailbreak tool for your device according to your version. No need to search for the tools anymore.
Here some more from TaigOne.

TaigOne

TaigOne search the best jailbreak tool for you.

No need to search it by yourself. Not only TaigOne search the tool, but also it offers the tool. In case there are no jailbreak tools available for your version, TaigOne offers alternative tools too.

I am using iOS 10.3 - iOS 10.3.2 version, Can I still use this?

Yes, you can. TaigOne is comaptible for any iOS version.

Is this untethered or semi-tethered?

This method is not a untethered or semi-tethered. TaigOne installer is only a Jailbreak app installation process for iOS 10.3.3.

Is this method void my Apple warranty?

No, you are safe to the end. Your Apple care warrenty wii never get void from TaigOne.

Should I restore my device to remove the Jailbreak apps?

No. You can just delete the jailbreak apps easily as iTunes apps. Even you can easily remove the TaigOnein this way.

Is this method compatible with iPhone 7?

Yes, you can install Jailbreak apps for iPhone 7 or any.

What are the features of TaigOne?

TaigOne offers you the most suitable jailbreak tool for your iOS version. Then TaigOne offers you the jailbreak alternatives. Jailbreak apps and tweaks are also available with TaigOne.
24*7 customer service is available with TaigOne. So you do not need to cling on your jailbreak related problems anymore.
see more for yourself.

iPhone 7 Jailbreak

All hackers are still trying to exploit iPhone 7 but there is no jailbreak solution yet. Apple has introduced kernel patch protection for iPhone 7 and it prevents iPhone 7 from jailbreaking. TaigOne is the only available jailbreak solution for iPhone 7 which runs on iOS 10.3.

TaiG competitors

Pangu - Pangu team works for iOS 10.3 Jailbreak. Last time they released the Also, they work for iOS 9.3.4/9.3.5 Jailbreak.


Yalu - Teen hacker could release the Yalu Jailbreak for This Jailbreak is the latest SemiTethered Jailbreak which you can install the full functional Cydia. Therefore we can expect iOS 10.3 Jailbreak from this teen hacker.


PPJailbreak- PP Team released the iOS 10.2 Jailbreak joining with Luca (Yalu Jailbreak developer).


Z Team - Z Team could release the 3rd party app store for non-jailbroken devices. It was compatible with all latest iOS versions including iOS 10.3.3.

Jailbreak Related Videos

  • Appstore Paid Apps for Free Your browser does not support the video tag.
  • TaigOne Downgrader Your browser does not support the video tag.
  • Cydia for iOS 12.1 | iOS 12.1.1 Your browser does not support the video tag.