A screwdriver is used to pry the lid off a can of paint. What type of lever is the screwdriver in this instance? 1st Class Lever 2nd Class Lever 3rd Class Lever It’s actually acting as an inclined plane. 10
12
3.0
8.3
25
75
10
29
1.7
3.5
28
350
10
Participant Scores
12
Jacob
Joey
Daniel
David
Nicole B.
A single pulley is used to hoist a safe with a mass of 45. 0 kg
A single pulley is used to hoist a safe with a mass of 45.0 kg. If the machine is 100% efficient, what effort force will be required to hoist the safe?
45.0 N
90.0 N
205 N
266 N
441 N
10
A snow shovel is an example of which type of lever? (Hint: The handle of the shovel is the fulcrum.)
1st Class
2nd Class
3rd Class
10
How long must an inclined plane be to push a 100 kg object to a height of 2.0 meters using a force of 200 N? Friction can be ignored.
2.0 m
9.8 m
50 m
100 m
200 m
400 m
10
A wheel and axle machine requires an effort force of 5.0 N to lift a load with a mass of 5.1 kg. If the machine is ideal and has a wheel radius of 12 cm, what is the radius of the axle?
1.0 cm
1.2 cm
5.0 cm
10 cm
1.2 m
2.4 m
10
Participant Scores
28
Jacob
Joey
Daniel
David
Mackenzie
20 N
25 N
196 N
245 N
1960 N
Answer Now
10
What force will be required to push a 500 N box to a height of 2.50 meters on a ramp that is 10.0 meters long and 85% efficient?
4.00 N
50.0 N
106
125 N
147 N
10
1
2
3
4
5
10
0.50
1.00
1.50
2.00
2.50
Answer Now
10
Participant Scores
44
Jacob
Mackenzie
39
Nicole F.
Joey
Daniel
A ramp is 12 meters long and 3.0 meters high. It takes 145 N of force to push a 400 N crate up the ramp. Determine the efficiency of the ramp.
.36 %
.69 %
3.0 %
8.2 %
36 %
69 %
145 %
10
An object is placed 1. 75 meters from the fulcrum of a lever
An object is placed 1.75 meters from the fulcrum of a lever. The effort force is 0.50 meters from the fulcrum. What is the actual mechanical advantage if the lever is 95% efficient?
.271
.286
.301
3.33
3.50
3.68
Answer Now
10
20%
31%
69%
80%
87%
96%
Answer Now
10
Participant Scores
56
Jacob
Mackenzie
51
Nicole F.
Joey
Daniel
A certain ramp is 10 meters long and is 50% efficient
A certain ramp is 10 meters long and is 50% efficient. It requires 25 N of force to push a 50 N crate up the ramp. How tall is the ramp?
1.0 m
2.0 m
2.5 m
3.5 m
4.0 m
5.0 m
22
Participant 1
Participant 2
Participant 3
Participant 4
Participant 5
Participant 6
Participant 7
Participant 8
Participant 9
Participant 10
М.В. Рудакова (г.Иркутск)
Методическая разработка занятия по теме «Machines and Work» (Машины и работа)
Аннотация
Данное занятие проводится при изучении темы: «Машины и работа» со студентами III курса (1 семестр) по специальности 110809 «Механизация сельского хозяйства ». Занятие разработано по учебнику Бгашев В.Н., Долматовская Е.Ю. Английский язык для студентов машиностроительных специальностей. Студенты уже прошли базовый этап подготовки по дисциплине, и уже достаточно владеют лексическим и грамматическим материалом для изучения программы английского языка профессиональной направленности. Занятие предназначается для продвинутого этапа подготовки по английскому языку и обеспечивает коммуникативную профессиональную направленность обучения. По данной теме студенты уже изучили основной лексический и грамматический материал, поэтому тип занятия - систематизация и обобщение знаний . Все этапы занятия построены на единых методических принципах, развивают основные виды иноязычной речевой деятельности, формируют межкультурные компетенции будущих специалистов. На занятии используется технология коммуникативного обучения и технология обучения в сотрудничестве, а также технология критического мышления. Для реализации поставленной цели применяются познавательные методы мотивации, волевые методы (самооценка и коррекция, рефлексия поведения), а также метод мозгового штурма. На этапе построения проекта студентам предлагается использовать, как прием, ментальную карту (Mind Map). Особое внимание было уделено изучению лексического аспекта, так как обучающийся должен уметь переводить тексты профессиональной направленности, общаться на профессиональные темы; самостоятельно совершенствовать и пополнять словарный запас.
Все этапы занятия способствуют развитию речевой, языковой и профессиональной компетенции и достижению поставленных воспитательных и образовательных целей. Предметом оценки служат умения и знания, предусмотренные ФГОС по дисциплине Английский язык , направленные на формирование общих и профессиональных компетенций.
Тема занятия: «Machines and Work» (Машины и работа)
Цель занятия: создать условия для развитиякоммуникативной компетенции.
Задачи занятия: образовательная: формировать лексические навыки говорения, развивать умения смыслового чтения (просмотровое, поисковое, изучающее); развивающая: развивать память, внимание, мышление, логическое мышление и языковую догадку, учить анализировать, обобщать, группировать); воспитательная; воспитывать познавательный интерес в изучении иностранного языка, формировать навыки групповой работы.
Формируемые компетенции: ОК 1. Понимать сущность и социальную значимость своей будущей профессии, проявлять к ней устойчивый интерес.
ОК 3. Принимать решения в стандартных и нестандартных ситуациях и нести за них ответственность.
ОК 4. Осуществлять поиск и использование информации, необходимой для эффективного выполнения профессиональных задач, профессионального и личностного развития.
ОК 5. Владеть информационной культурой, анализировать и оценивать информацию с использованием информационно-коммуникационных технологий.
ОК 6. Работать в коллективе и команде, эффективно общаться с коллегами, руководством, потребителями.
Тип занятия: систематизация и обобщение знаний.
Межпредметные связи: русский язык, физика, механика, машины, механизмы.
Оборудование занятия: учебник, проектор, компьютер, экран, презентация, раздаточный материал, листы ватмана, фломастеры, магниты.
Формы работы: индивидуальная, групповая, фронтальная
Этапы занятия. Формы работы
Содержание занятия. Возможные методы и приемы выполнения
Основные виды учебной деятельности
УУД, формирующиеся на данном этапе
Деятельность учителя
Деятельность обучающихся
Этап мотивации учебной деятельности
Организационный момент
(2 мин.)
T. Good morning, students! I`m glad to see you. It is really fine day today, isn’t it? How are you today? What about the weather today? Is it fine? Let`s start our lesson.
Учитель приветствует студентов, проверяет их готовность к занятию.
Студенты включаются в иноязычное общение, реагируя на реплики учителя, согласно коммуникативной задаче.
Личностные: адекватная мотивация учебной деятельности; формирование мотивации к изучению иностранного языка; формирование положительного отношения к занятию иностранного языка.
Регулятивные: самооценка готовности к уроку.
Коммуникативные: слушать и реагировать на реплику адекватно речевой ситуации.
Лексико-фонетическая зарядка
(7 мин.)
Electricity, effort, motion, distance, rate, weight, horsepower, watt, kilowatt, force, work wind, water, steam, petroleum, prime mover, windmill, turbine, generator, steam engine, internal combustion engine, electric motor
Учитель предлагает студентам проговаривать слова для развития произносительных навыков.
Студенты проговаривают слова, которые в дальнейшем они смогут использовать в своей речи, работают над произношением. Соотносят графический и звуковой образ английских слов.
Регулятивные: осуществлять самоконтроль правильности произношения.
Познавательные: извлекать необходимую информацию из прослушанного.
Речевое погружение
(7 мин.)
Т . Thank you! Great! Now, students look at the screen, here you can see the car. Let`s try to name the parts of this car and describe them using the model: This is/these are… . N+ is/are made of…
For example: this is a windscreen. The windscreen is made of glass. ( Приложение 1 )
Учитель организует погружение в иноязычную среду, закрепляет навыки употребления знакомых лексических единиц и грамматической модели.
Студенты, используя ранее изученные лексические единицы, описывают автомобиль, называя части автомобиля и материалы, из которых они сделаны.
Коммуникативные: слушать и осознанно воспринимать речь других студентов, осуществлять корректировку неправильных ответов.
Ознакомление с темой занятия, сообщение целей
(2 мин.)
Т . Students, as you know a machine is a device that transmits and changes force or motion into work. A machine can be very simple or very complex. Terms like work, force, and power are closely connected with machines. I think you`ll try to guess what our lesson will be about. Well, what shall we do today? Yes, you`re right, we`ll speak about machines and work. We must give the definitions of the words - work, force, power and connect them with «work» and «machines». Is the topic interesting for you?
Учитель дает возможность студентам самостоятельно определить тему занятия, цели и что для этого необходимо.
Студенты самостоятельно определяют тему и цели занятия с помощью опорной лексики.
Познавательные: уметь адекватно, осознанно и произвольно строить речевое высказывание в устной речи.
Регулятивные: определять цель учебной деятельности с помощью учителя; планировать свои действия для реализации задач.
II .Этап актуализации опорных знаний
Лексическая работа
(10 мин.)
T. 1) To begin with I propose you to divide the following words into three groups, those which describe: 1)basic terms of physics and mechanics; 2)energy sources; 3)mechanisms, machines. ( Приложение 2)
2) The following verbs are often related with basic terms of physics and mechanics. Now, students try to make up word combinations using these verbs: to produce, to transform, to supply, to result in, to exert, to set, to perform, to result from, to measure…in. Model: to transmit motion/force ( Приложение 2)
Учитель активизирует знакомую лексику, корректирует ответы студентов по необходимости.
Студенты самостоятельно выполняют задания, используя ранее изученные лексические единицы. Свои ответы заносят в таблицу. Проверка и коррекция выполненного задания.
Коммуникативные: осознанное построение речевых высказываний, рефлексия.
Регулятивные: исследование условий учебной задачи, обсуждение способов решения.
Познавательные: аргументация своей точки зрения.
Говорение, предугадывание
(4 мин.)
T. Look at the screen, here you can see the terms. The task is to match each one with its correct definition.
(Приложение 3)
Учитель проверяет правильность выполнения задания.
Студенты подбирают к каждому термину соответствующее ему определение.
Логические:
Познавательные: уметь анализировать информацию.
III . Этап самостоятельной работы с самопроверкой по образцу
Смысловоечтение
(14 мин.)
T. Well done. Let`s continue our lesson. Read the text “Machines and work”, try to focus on its essential facts, and choose the most suitable heading below for each paragraph: 1) Prime movers 2) Definition of “machine” 3) The relationship between «work» and «force» 4) Power and its measures.
You also should find the definitions of basic terms connected with «machines» and «work». Text A is on page 192 .
Учитель информирует обучающихся об алгоритме работы над чтением.
Студенты читают текст с пониманием основного содержания, подбирают заголовки к абзацам и находят определения основным понятиям, связанными с «работой» и «машинами».
Логические: развивать умения сосредоточить внимание, догадку и логику.
Регулятивные: совершенствовать навыки смыслового чтения, используя лексику урока.
Познавательные: развивать смысловое чтение; осуществлять поиск и выделение необходимой информации; уметь структурировать знания.
Самопроверка и самооценка
(5 мин.)
T. Time is running. Let`s check your tasks.
Учитель контролирует, как студенты аргументируют свою точку зрения, корректирует их ответы.
Студенты обсуждают прочитанный текст, дают определения основным понятиям, связанными с «работой» и «машинами».
Регулятивные: уметь правильно оценивать результаты своей работы и одногруппников.
Коммуникативные: уметь слушать друг друга для восприятия необходимых сведений и поддерживания беседы.
Говорение. Работа в группах
(12 мин.)
T. Well, let`s go on. Now, students, we`ll have a group work. I will give you some questions about the text and you should answer them. ( Приложение 4)
Учитель делит студентов на две группы и дает вопросы для обсуждения.
Студенты делятся на две группы и вытягивают вопросы по прочитанному тексту. Обсуждают вопросы и ответы на них. Используют готовые речевые материалы для оформления ответов.
Коммуникативные: участвовать в работе группы, осуществлять взаимоконтроль и взаимопомощь; проявлять активность во взаимодействии для решения общих задач.
Познавательные: уметь сопоставлять и отбирать информацию из текста, осознанно строить речевое высказывание в устной форме.
Личностные: формировать навыки сотрудничества, проявлять инициативу.
IV. Этап построения проекта
Чтение с целью извлечения специальной информации (работа в группах)
(15 мин.)
T. Students, your task is to give a short report about «Machine, Work, Power».
Учитель ставит задачу перед группами приготовить сообщение «Машина, работа, сила» с использованием активного словаря, который был составлен во время лексической работы на этапе актуализации опорных знаний. Учитель предлагает студентам лист ватмана для оформления своего сообщения.
Студенты составляют ментальную карту, используя информацию из текста и таблицу (Приложение 2), распределяют, кто и о чем будет говорить.
Коммуникативные: участие в работе группы: распределение обязанностей, планирование своей части работы, осуществление взаимоконтроля, взаимопомощь; оформление своих мыслей с учетом учебной задачи.
Познавательные: умение анализировать, группировать факты, строить логические рассуждения; умение выделять главные факты, опуская второстепенные.
Личностные: проявлять инициативу и самостоятельность, стремиться к совершенствованию собственной речевой культуры.
Регулятивные: принимать и сохранять учебную задачу, сравнивать результаты соей работы с результатами других.
V . Этап проверки реализации построенного проекта
Проверка проекта
(8 мин.)
T. So, it`s time to begin to represent your projects.
Учитель определяет уровень усвоения необходимых знаний.
Студенты рассказывают об основных понятиях физики и механики, механизмах и источниках энергии и показывают их взаимосвязь с машинами и работой. Свои сообщения сопровождают демонстрацией проекта на листе ватмана (Mind Map).
Познавательные: умение осознанно строить речевое высказывание в устной форме, совершенствовать речевые навыки.
Коммуникативные: формировать собственное мнение и позицию; аргументировать свою точку зрения; участвовать в работе группы.
IV . Этап рефлексии учебной деятельности на занятии
Подведение итогов работы
(1,5 мин.)
T. Now we come to the end of the lesson. Do you remember the topic? What did we study today? What was new for you? Let’s review the new vocabularies in chain.
Учитель задает вопросы. Выставляет оценки за занятие, комментирует, мотивирует на дальнейшую успешную работу.
Студенты отвечают на вопросы учителя и высказывают свое мнение.
Регулятивные: умение контролировать свою деятельность по результатам, умение адекватно понимать оценку учителя, одногруппников.
Личностные: умение оценивать свою деятельность; проявлять стремление к совершенствованию собственной речевой культуры в целом.
Рефлексия
(1,5 мин.)
T. Do you like our lesson? Are you in a good mood at the end of the lesson? Do you like your work today?
Учитель приглашает студентов высказать свое мнение об уроке.
Студенты строят высказывания, выражающие мнение, отвечают на вопросы на учителя. Осваивают формы личностной рефлексии. (Приложение5)
Домашнеезадание
(1 мин.)
T. Your homework is the ex.26, p.203. You should fill the table.
Учитель объясняет, что надо сделать в процессе домашнего задания.
Студенты записывают домашнее задание.
Выводы
Занятие английского языка на III курсе по теме «Machines and Work» (Машины и работа) является занятием систематизации и обобщения знаний по данной теме.
На этапе организационного момента учитель создает общий положительный настрой на предстоящее занятие, помогает обучающимся организовать собственное учебное пространство. На данном занятии реализуются принципы личностно-ориентированного, развивающего обучения, осуществляется самооценка и взаимооценка обучающимися. Деятельность учителя в большей степени представлена в виде организации работы и помощи обучающимся в различных учебных ситуациях.
На основных этапах занятия используется системно-деятельностный и коммуникативный подходы. При подведении итогов и рефлексии предусмотрено обсуждение деятельности студентов на уроке, само- и взаимооценивание результатов работы, посредством чего обучающиеся овладевают навыками анализа, оценки своей работы и других, умением участвовать в диалоге, уважительно высказываться о деятельности других.
В ходе занятия (наряду с учебными) решались и жизненно-практические задачи, использовался жизненный опыт обучающихся с целью развития их познавательной активности, самостоятельности.
Список использованной литературы
Бгашев В.Н., Долматовская Е.Ю. Английский язык для студентов машиностроительных специальностей. М.: Астрель АСТ, 2013. 381 с.
Дубинина В.Г . Personality (Личность)//Английский язык. Все для учителя. 2014. №1. С.14-20.
Интернет-ресурсы - Википедия. свободная энциклопедия.
Чернухина А.Е. Англо-русский технический словарь. М.:ОНИКС, 1997. 1026 с.
Приложение 1
Let`s try to name the parts of this car and describe them using the model: This is/these are… . N+ is/are made of…
For example: this is a windscreen. The windscreen is made of glass
Bonnet – капот
Wing mirror – боковое зеркало
Windscreen – лобовое стекло
Rear-view mirror – зеркало заднего вида
Windscreen wiper – «дворник»
Door – дверь
Boot – багажник
Tyre – шина
Wheel – колесо
Headlight – фара
Bumper – бампер
Licence plate – номерной знак
Indicator – указатель поворота
Приложение 2
1) Divide the following words into three groups, those which describe: 1)basic terms of physics and mechanics; 2)energy sources;
3)mechanisms, machines:
Electricity, effort, motion, distance, rate, weight, horsepower, watt, kilowatt, force, work wind, water, steam,
petroleum, prime mover, windmill, turbine, generator, steam engine, internal combustion engine, electric motor
2) The following verbs are often related with basic terms of physics and mechanics. Try to make up word combinations using these verbs: to produce, to transform, to supply, to result in, to exert, to set, to perform, to result from, to measure…in. Model: to transmit motion/force.
Active vocabulary
application
Nouns and combinations with the nouns
Verb combinations
1. Basic terms of physics and mechanics
electricity
effort
motion
distance
rate
weight
horsepower
watt
kilowatt
force
work
to produce electricity
to exert effort
to set in motion
to result in motion
to hold up the weight
to exert force
to produce work
to perform work
to result from
2. Energy sources
wind
water
steam
petroleum
3. Mechanisms and machines
Prime mover
windmill
turbine
generator
steam engine
internal combustion engine
electric motor
Приложение 3
Match the term with its correct definition:
Machine
the rate at which work is performed.
Prime mover
a device that uses force to accomplish something.
Force
an effort that results in motion or physical change.
Work
a machine whose input is natural source of energy.
Power
a combination of the force and the distance through which it is exerted.
Приложение 4
Questions for the first group:
What is a simple definition of a machine? What is more technical
definition? What does this definition imply?
Describe some very simple machines. Name some complex machines.
What do we call machines whose is a natural source of energy? What natural
sources of energy do you know and what machines use them?
Why aren`t electric motors prime movers?
Questions for the second group:
What is force? Give some examples of force.
What is work? How can work be expressed mathematically?
Give an example.
What is power?
How is the rate of doing work usually given in the English-
Speaking countries? Why was the term invented?
In what terms is power measured in the metric system?
Приложение 5
Engineering Connection
Why do engineers care about simple machines? How do such devices help engineers improve society? Simple machines are important and common in our world today in the form of everyday devices (crowbars, wheelbarrows, highway ramps, etc.) that individuals, and especially engineers, use on a daily basis. The same physical principles and mechanical advantages of simple machines used by ancient engineers to build pyramids are employed by today"s engineers to construct modern structures such as houses, bridges and skyscrapers. Simple machines give engineers added tools for solving everyday challenges.
Learning Objectives
After this lesson, students should be able to:
- Understand what a simple machine is and how it would help an engineer to build something.
- Identify six types of simple machines.
- Understand how the same physical principles used by engineers today to build skyscrapers were employed in ancient times by engineers to build pyramids.
- Generate and compare multiple possible solutions to creating a simple lever machine based on how well each met the constraints of the challenge.
More Curriculum Like This
Levers That Lift
Students are introduced to three of the six simple machines used by many engineers: lever, pulley, and wheel-and-axle. In general, engineers use the lever to magnify the force applied to an object, the pulley to lift heavy loads over a vertical path, and the wheel-and-axle to magnify the torque appl...
Slide Right on by Using an Inclined Plane
Students explore building a pyramid, learning about the simple machine called an inclined plane. They also learn about another simple machine, the screw, and how it is used as a lifting or fastening device.
Splash, Pop, Fizz: Rube Goldberg Machines
Refreshed with an understanding of the six simple machines; screw, wedge, pully, incline plane, wheel and axle, and lever, student groups receive materials and an allotted amount of time to act as mechanical engineers to design and create machines that can complete specified tasks.
Pyramid Building: How to Use a Wedge
Students learn how simple machines, including wedges, were used in building both ancient pyramids and present-day skyscrapers. In a hands-on activity, students test a variety of wedges on different materials (wax, soap, clay, foam).
Educational Standards
Each TeachEngineering lesson or activity is correlated to one or more K-12 science, technology, engineering or math (STEM) educational standards.
All 100,000+ K-12 STEM standards covered in TeachEngineering are collected, maintained and packaged by the Achievement Standards Network (ASN) , a project of D2L (www.achievementstandards.org).
In the ASN, standards are hierarchically structured: first by source; e.g. , by state; within source by type; e.g. , science or mathematics; within type by subtype, then by grade, etc .
NGSS: Next Generation Science Standards - Science
International Technology and Engineering Educators Association - Technology
Introduction/Motivation
How did the Egyptians build the Great Pyramids thousands of years ago (~2,500 BCE)? Could you build a pyramid using 9,000-kilogram (~10-ton or 20,000-lb) blocks of stone with your bare hands? That"s like trying to move a large elephant with your bare hands! How many people might it take to move a block that big? It would still be a challenge to build a pyramid today even with modern tools, such as jackhammers, cranes, trucks and bulldozers. But without these modern tools, how did Egyptian workers cut, shape, transport and place enormous stones? Well, one key to accomplishing this amazing and difficult task was the use of simple machines.
Simple machines are devices with no, or very few, moving parts that make work easier. Many of today"s complex tools are really just more complicated forms of the six simple machines. By using simple machines, ordinary people can split huge rocks, hoist large stones, and move blocks over great distances.
However, it took more than just simple machines to build the pyramids. It also took tremendous planning and a great design . Planning, designing, working as a team and using tools to create something, or to get a job done, is what engineering is all about. Engineers use their knowledge, creativity and problem-solving skills to accomplish some amazing feats to solve real-world challenges. People call on engineers to use their understanding of how things work to do seemingly impossible jobs and make everyday activities easier. It is surprising how many times engineers turn to simple machines to solve these problems.
Once we understand simple machines, you will recognize them in many common activities and everyday items. (Hand out .) These are the six simple machines: wedge, wheel and axle, lever, inclined plane, screw , and pulley . Now that you see the pictures, do you recognize some of these simple machines? Can you see any of these simple machines around the classroom? How do they work? Well, an important vocabulary term when learning about simple machines is mechanical advantage . Mechanical advantage of simple machines means we can use less force to move an object, but we have to move it a longer distance. A good example is pushing a heavy object up a ramp. It may be easier to push the object up a ramp instead of just lifting it up to the right height, but it takes a longer distance. A ramp is an example of the simple machine called an inclined plane . We are going to learn a lot more about each of these six simple machines that are a simple solution to helping engineers, and all humans, do hard work.
Sometimes it is difficult to recognize simple machines in our lives because they look different than the examples we see at school. To make our study of simple machines easier, let"s imagine that we are living in ancient Egypt and that the leader of the country has hired us as engineers to build a pyramid. Today"s availability of electricity and technologically-advanced machines make it difficult for us to see what the simple machine is accomplishing. But in the context of ancient Egypt, the simple machines that we will study are the much more basic tools of the time. After we develop an understanding of simple machines, we will shift our context to building a skyscraper in the present day, so we can compare and contrast how simple machines were used across the centuries and are still used today.
Lesson Background and Concepts for Teachers
Use the attached Introduction to Simple Machines PowerPoint presentation and Simple Machines Reference Sheet as helpful classroom tools. (Show the PowerPoint presentation, or print out the slides to use with an overhead projector. The presentation is animated to promote an inquiry-based style; each click reveals a new point about each machine; have students suggest characteristics and examples before you reveal them.)
Simple machines are everywhere; we use them everyday to perform simple tasks. Simple machines have also been in use since the early days of human existence. While simple machines take many shapes, they come in six basic types:
- Wedge : A device that forces things apart.
- Wheel and axle : Used to reduce friction.
- Lever : Moves around a pivot point to increase or decrease mechanical advantage.
- Inclined plane : Raises objects by moving up a slope.
- Screw : A device that can lift or hold things together.
- Pulley : Changes the direction of a force.
We use simple machines because they make work easier. The scientific definition of work is the amount of force that is applied to an object multiplied by the distance the object is moved. Thus, work consists of force and distance. Each job takes a specific amount of work to finish it, and this number does not change. Thus, the force times the distance always equals the same amount of work. This means that if you move something a smaller distance you need to exert a greater force. On the other hand, if you want to exert less force, you need to move it over a greater distance. This is the force and distance trade off, or mechanical advantage , which is common to all simple machines. With mechanical advantage, the longer a job takes, the less force you need to use throughout the job. Most of the time, we feel that a task is hard because it requires us to use a lot of force. Therefore, using the trade off between distance and force can make our task much easier to complete.
The wedge is a simple machine that forces objects or substances apart by applying force to a large surface area on the wedge, with that force magnified to a smaller area on the wedge to do the actual work. A nail is a common wedge with a wide nail head area where the force is applied, and a small point area where the concentrated force is exerted. The force is magnified at the point, enabling the nail to pierce wood. As the nail sinks into the wood, the wedge shape at the point of the nail moves forward, and forces the wood apart.
Figure 1: An axe is an example of a wedge.
Everyday examples of wedges include an axe (see Figure 1), nail, doorstop, chisel, saw, jackhammer, zipper, bulldozer, snow plow, horse plow, zipper, airplane wing, knife, fork and bow of a boat or ship.
The wheel and axle is a simple machine that reduces the friction involved in moving an object, making the object easier to transport. When an object is pushed, the force of friction must be overcome to start it moving. Once the object is moving, the force of friction opposes the force exerted on the object. The wheel and axle makes this easier by reducing the friction involved in moving an object. The wheel rotates around an axle (essentially a rod that goes through the wheel, letting the wheel turn), rolling over the surface and minimizing friction. Imagine trying to push a 9,000-kilogram (~10-ton) block of stone. Wouldn"t it be easier to roll it along using logs placed underneath the stone?
Everyday examples of the wheel and axle include a car, bicycle, office chair, wheel barrow, shopping cart, hand truck and roller skates.
A lever simple machine consists of a load, a fulcrum and effort (or force). The load is the object that is moved or lifted. The fulcrum is the pivot point, and the effort is the force required to lift or move the load. By exerting a force on one end of the lever (the applied force), a force at the other end of the lever is created. The applied force is either increased or decreased, depending on the distance from the fulcrum (the point or support on which a lever pivots) to the load, and from the fulcrum to the effort.
Figure 2: A crowbar is an example of a lever.
Copyright © 2004 Microsoft Corporation, One Microsoft Way, Redmond, WA 98052-6399 USA. All rights reserved. With notations by the ITL Program, University of Colorado at Boulder, 2005.
Everyday examples of levers include a teeter-totter or see-saw, crane arm, crow bar, hammer (using the claw end), fishing pole and bottle opener. Think of a how you use a crowbar (see Figure 2). By pushing down on the long end of the crowbar, a force is created at the load end over a smaller distance, once again, demonstrating the tradeoff between force and distance.
Inclined planes make it easier to lift something. Think of a ramp. Engineers use ramps to easily move objects to a greater height. There are two ways to raise an object: by lifting it straight up, or by pushing it diagonally up. Lifting an object straight up moves it over the shortest distance, but you must exert a greater force. On the other hand, using an inclined plane requires a smaller force, but you must exert it over a longer distance.
Everyday examples of inclined planes include highway access ramps, sidewalk ramps, stairs, inclined conveyor belts, and switchback roads or trails.
Figure 3: A car jack is an example of a screw-type simple machine that enables one person to lift up the side of a car.
A screw is essentially an inclined plane wrapped around a shaft. Screws have two primary functions: they hold things together, or they lift objects. A screw is good for holding things together because of the threading around the shaft. The threads grip the surrounding material like teeth, resulting in a secure hold; the only way to remove a screw is to unwind it. A car jack is an example of a screw being used to lift something (see Figure 3).
Everyday examples of screws include a screw, bolt, clamp, jar lid, car jack, spinning stool and spiral staircase.
Figure 4: A pulley on a ship helps people pull in a heavy fishing net.
A pulley is a simple machine used to change the direction of a force. Think of raising a flag or lifting a heavy stone. To lift a stone up into its place on a pyramid, one would have to exert a force that pulls it up. By using a pulley made from a grooved wheel and rope, one can pull down on the rope, capitalizing on the force of gravity, to lift the stone up . Even more valuable, a system of several pulleys can be used together to reduce the force needed to lift an object.
Everyday examples of pulleys in use include flag poles, elevators, sails, fishing nets (see Figure 4), clothes lines, cranes, window shades and blinds, and rock climbing gear.
Compound Machines
A compound machine is a device that combines two or more simple machines. For example, a wheelbarrow combines the use of a wheel and axle with a lever. Using the six basic simple machines, all sorts of compound machines can be made. There are many simple and compound machines in your home and classroom. Some examples of the compound machines you may find are a can opener (wedge and lever), exercise machines/cranes/tow trucks (levers and pulleys), shovel (lever and wedge), car jack (lever and screw), wheel barrow (wheel and axle and lever) and bicycle (wheel and axle and pulley).
Vocabulary/Definitions
Design: (verb) To plan out in systematic, often graphic form. To create for a particular purpose or effect. Design a building. (noun) A well thought-out plan.
Engineering: Applying scientific and mathematical principles to practical ends such as the design, manufacture and operation of efficient and economical structures, machines, processes and systems.
Force: A push or pull on an object.
Inclined plane: A simple machine that raises an object to greater height. Usually a straight slanted surface and no moving parts, such as a ramp, sloping road or stairs.
Lever: A simple machine that increases or decreases the force to lift something. Usually a bar pivoted on a fixed point (fulcrum) to which force is applied to do work.
Mechanical advantage: An advantage gained by using simple machines to accomplish work with less effort. Making the task easier (which means it requires less force), but may require more time or room to work (more distance, rope, etc.). For example, applying a smaller force over a longer distance to achieve the same effect as applying a large force over a small distance. The ratio of the output force exerted by a machine to the input force applied to it.
Pulley: A simple machine that changes the direction of a force, often to lift a load. Usually consists of a grooved wheel in which a pulled rope or chain runs.
Pyramid: A massive structure of ancient Egypt and Mesoamerica used for a crypt or tomb. The typical shape is a square or rectangular base at the ground with sides (faces) in the form of four triangles that meet in a point at the top. Mesoamerican temples have stepped sides and a flat top surmounted by chambers.
Screw: A simple machine that lifts or holds materials together. Often a cylindrical rod incised with a spiral thread.
Simple machine: A machine with few or no moving parts that is used to make work easier (provides a mechanical advantage). For example, a wedge, wheel and axle, lever, inclined plane, screw, or pulley.
Spiral: A curve that winds around a fixed center point (or axis) at a continuously increasing or decreasing distance from that point.
Tool: A device used to do work.
Wedge: A simple machine that forces materials apart. Used for splitting, tightening, securing or levering. It is thick at one end and tapered to a thin edge at the other.
Wheel and axle: A simple machine that reduces the friction of moving by rolling. A wheel is a disk designed to turn around an axle passed through the center of the wheel. An axle is a supporting cylinder on which a wheel or a set of wheels revolves.
Work: Force on an object multiplied by the distance it moves. W = F x d (force multiplied by distance).
Associated Activities
- Stack It Up! - Students analyze and begin to design a pyramid. They perform calculations to determine the area of their pyramid base, stone block volumes, the number of blocks required for their pyramid base, and make a scaled drawing of a pyramid on graph paper.
- Choosing a Pyramid Site - Working in engineering project teams, students choose a site for the construction of a pyramid. They base their decision on site features as provided by a surveyor"s report; distance from the quarry, river and palace; and other factors they deem important to the project.
Lesson Closure
Today, we have discussed six simple machines. Who can name them for me? (Answer: Wedge, wheel and axle, lever, inclined plane, screw, and pulley.) How do simple machines make work easier? (Answer: Mechanical advantage enables us to use less force to move an object, but we have to move it a longer distance.) Why do engineers use simple machines? (Possible answers: Engineers creatively use their knowledge of science and math to make our lives better, often using simple machines. They invent tools that make work easier. They accomplish huge tasks that could not be done without the mechanical advantage of simple machines. They design structures and tools to use our environmental resources better and more efficiently.) Tonight, at home, think about everyday examples of the six simple machines. See how many you can find around your house!
Complete the KWL Assessment Chart (see the Assessment section). Gauge students" understanding of the lesson by assigning the Simple Machines Worksheet as a take-home quiz. As an extension, use the attached . Review the information and answer any questions. Suggest the students keep the sheet handy in their desks, folders or journals.
Lesson Summary Assessment
Closing Discussion: Conduct an informal class discussion, asking the students what they learned from the activities. Ask the students:
- Who can name the different types of simple machines? (Answer: Wedge, wheel and axle, lever, inclined plane, screw, and pulley.)
- How do simple machines make work easier? (Answer: Mechanical advantage enables us to use less force to move an object, but we have to move it a longer distance.)
- Why do engineers use simple machines? (Possible answers: Engineers creatively use their knowledge of science and math to make our lives better, often using simple machines. They invent tools that make work easier. They accomplish huge tasks that could not be done without the mechanical advantage of simple machines. They design structures and tools to use our environmental resources better and more efficiently.)
Remind students that engineers consider many factors when they plan, design and create something. Ask the students:
- What are the considerations an engineer must keep in mind when designing a new structure? (Possible answers: Size and shape (design) of the structure, available construction materials, calculation of materials needed, comparing materials and costs, making drawings, etc.)
- What are the considerations an engineer must keep in mind when choosing a site to build a new structure? (Possible answers: Site physical characteristics , distance to construction resources , suitability for the structure"s purpose .)
KWL Chart (Conclusion): As a class, finish column L of the KWL Chart as described in the Pre-Lesson Assessment section. List all of the things they learned about simple machines. Were all of the W questions answered? What new things did they learn?
Take-Home Quiz: Gauge students" understanding of the lesson by assigning the Simple Machines Worksheet as a take-home quiz.
Lesson Extension Activities
Use the attached Simple Machines Scavenger Hunt! Worksheet to conduct a fun scavenger hunt. Have the students find examples of all the simple machines used in the classroom and their homes.
Bring in everyday examples of simple machines and demonstrate how they work.
Illustrate the power of simple machines by asking students to do a task without using a simple machine, and then with one. For example, create a lever demonstration by hammering a nail into a piece of wood. Have students try to pull the nail out, first using only their hands
Bring in a variety of everyday examples of simple machines. Hand out one out to each student and have them think about what type of simple machine it is. Next, have students place the items into categories by simple machines and explain why they chose to place their item there. Ask students what life would be like without this item. Emphasize that simple machines make our life easier.
See the Edheads website for an interactive game on simple machines: http://edheads.org.
Engineering Design Fun with Levers: Give each pair of students a paint stirrer, 3 small plastic cups, a piece of duct tape and a wooden block or spool (or anything similar). Challenge the students to design a simple machine lever that will throw a ping pong ball (or any other type of small ball) as high as possible. In the re-design phase, allow the students to request materials to add on to their design. Have a small competition to see which group was able to send the ping pong ball flying high. Discuss with the class why that particular design was successful versus other variations seen during the competition.
Additional Multimedia Support
See http://edheads.org for a good simple machines website with curricular materials including educational games and activities.
References
Dictionary.com. Lexico Publishing Group, LLC. Accessed January 11, 2006. (Source of some vocabulary definitions, with some adaptation) http://www.dictionary.com
Simple Machines. inQuiry Almanack, The Franklin Institute Online, Unisys and Drexel eLearning. Accessed January 11, 2006. http://sln.fi.edu/qa97/spotlight3/spotlight3.html
Contributors
Greg Ramsey; Glen Sirakavit; Lawrence E. Carlson; Jacquelyn Sullivan; Malinda Schaefer Zarske; Denise Carlson, with design input from the students in the spring 2005 K-12 Engineering Outreach Corps courseCopyright
© 2005 by Regents of the University of Colorado.Supporting Program
Integrated Teaching and Learning Program, College of Engineering, University of Colorado BoulderAcknowledgements
The contents of these digital library curricula were developed by the Integrated Teaching and Learning Program under National Science Foundation GK-12 grant no. 0338326. However, these contents do not necessarily represent the policies of the National Science Foundation, and you should not assume endorsement by the federal government.
Last modified: February 11, 2019
HanicalSimple Machines and its Mechanical Advantage What are Simple Machines ? What do we mean by Mechanical Advantage? Simple Machines * creates a greater output force than the input force Therefore since work is performed by applying a force over a distance, with the use of these machines we can do more work with lesser effort than working with our bare hands. In short, they make work easier. Mechanical Advantage * The Ratio between the input force and the output force. * The measure of the force amplification achieved by using a tool, mechanical device or machine system. Anyway what is input and output force? Input refers to the force you applied while output refers to the resultant force the object has from the input force. Example: I pushed a ball with 10 N of force, it is rolling with 10 N of force. I input 10 N into it, now it is outputting 10 N. The Six Classical Simple Machines The Lever(French word that means “to raise”) * A simple machine that allows you to gain a mechanical advantage in moving an object or in applying a force to an object. It is considered a "pure" simple machine because friction is not a factor to overcome, as in other simple machines . Part | Description | Fulcrum | Is where a solid board or rod can pivot...
Simple Machines Examples With Pictures Essay
Applied Force Other First Class Lever Examples Applied Force Action Force Spring Load Force Action http://library.thinkquest.org/J002079F/lever.htm Third Class Lever Effort or Applied Force Egg ready to be launched Release hook Compressed Spring Load or Resistance Fulcrum Applied force can be in any direction http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /sciber/lever3.htm http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /images/tweezer.gif http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /images/base.jpg Inclined Plane An inclined plane is a slanted surface used to raise an object. An inclined plane decreases the size of the effort force needed to move an object. However, the distance through which the effort force is applied is increased. The Big Rock rolling downhill with gravitational force IS NOT an example of an inclined plane. The inclined plane gives you mechanical advantage AGAINST gravity. Big Rock http://www.sirinet.net/~jgjohnso/simple.html An example of how an Inclined Plane can be used to raise a mass to activate another simple machine Egg ready to be launched By First Class Lever F Big Rock Force pushing (or pulling) Big Rock up the hill Inclined Plane First Class Lever Wedges Pulleys Wedges are moving inclined planes that are driven under loads to lift Pulleys use a wheel or set of wheels around which a single length (not...
Activity 1.1.2 Simple Machines Practice Problems Answer Key Essay
Activity 1.1.2 Simple Machines Practice Problems Answer Key Procedure Answer the following questions regarding simple machine systems. Each question requires proper illustration and annotation, including labeling of forces, distances, direction, and unknown values. Illustrations should consist of basic simple machine functional sketches rather than realistic pictorials. Be sure to document all solution steps and proper units. All problem calculations should assume ideal conditions and no friction loss. Simple Machines – Lever A first class lever in static equilibrium has a 50lb resistance force and 15lb effort force. The lever’s effort force is located 4 ft from the fulcrum. 1. Sketch and annotate the lever system described above. 2. What is the actual mechanical advantage of the system? Formula Substitute / Solve Final Answer AMA = 3.33 3. Using static equilibrium calculations, calculate the length from the fulcrum to the resistance force. Formula Substitute / Solve Final Answer A wheel barrow is used to lift a 200 lb load. The length from the wheel axle to the center of the load is 2 ft. The length from the wheel and axle to the effort is 5 ft. 4. Illustrate and annotate the lever system described above. 5. What is the ideal mechanical advantage of the system?...
Compound Machine
Our compound machine , consisting of mainly three different simple machines , is a crane designed to multiply your force in order to effectively and efficiently lift the four 75 kg up a steep hill. Our machine starts off with the gear train. As you rotate the handle, all the gears rotate along as well. Since we connected the rope of the pulley to our gears, it then puts the pulley system into action. We created movable pulleys throughout the arm until the tip to stabilize our rope and also give us a mechanical advantage. At the top section of our arm we created a lever to support the load. This magnifies our effort force since a combination of all the mechanical energy is being carried out. With the pulley system, connected all the way to the gear train, and the lever working all together, our mechanical advantage is increased greatly. We created a series of gear trains to not only increase our advantage of torque in the machine but also to increase the mechanical advantage rather than losing efficiency due to friction and thermal energy. Doing this, we magnified our effort force onto the load. Also, in the gears, we arranged it so that the input gear and the output gear gave us a low gear ratio and the idler gears in between. It also allows us to control the direction of our force in the machine . Since it is linked to the pulley, we can control the direction of the rope. However, it only...
Essay
SAMPLE PROBLEMS: . Simple Machines – Lever A first class lever in static equilibrium has a 50lb resistance force and 15lb effort force. The lever’s effort force is located 4 ft from the fulcrum. Sketch and annotate the lever system described above. | What is the actual mechanical advantage of the system? Formula | Substitute / Solve | Final Answer | | | AMA = 3.33 | * Using static equilibrium calculations, calculate the length from the fulcrum to the resistance force. Formula | Substitute / Solve | Final Answer | | | | A wheel barrow is used to lift a 200 lb load. The length from the wheel axle to the center of the load is 2 ft. The length from the wheel and axle to the effort is 5 ft. Illustrate and annotate the lever system described above. | What is the ideal mechanical advantage of the system? Formula | Substitute / Solve | Final Answer | | | | * Using static equilibrium calculations, calculate the effort force needed to overcome the resistance force in the system. Formula | Substitute / Solve | Final Answer | | | | A medical technician uses a pair of four inch long tweezers to remove a wood sliver from a patient. The technician is applying 1 lb of squeezing force to the tweezers. If more than 1/5 lb of force is applied to the sliver, it will break and become difficult to remove. Sketch and annotate the lever system...
Essay on Simple Machines
...Simple machines are extremely important to everyday life. They make stuff that is normally difficult a piece of cake. There are several types of simple machines . The first simple machine is a lever. A lever consists of a fulcrum, load, and effort force. A fulcrum is the support. The placing of the fulcrum changes the amount of force and distance it will take in order to move an object. The load is the applied force. The effort force is the force applied on the opposite side of the load. Levers can be placed in three classes. The 1st class levers are objects like pliers where the fulcrum is at the center of the lever. The 2nd class of levers are objects that have the fulcrum on the opposite side of the applied force like a nutcracker. The 3rd and final class is objects like crab claws. These objects of the load at one end and the fulcrum on the other. An inclined plane is another simple machine . Inclined planes are also known as ramps. Ramps make a trade off between distance and force. No matter how steep the ramp, the work is still the same. A winding road on a mountain side is a good example of a ramp. Some simple machines are modified inclined planes. The wedge is one of those machines . One or two inclined planes make up a wedge. Saws, knives,needles, and axes are made from wedges....
Simple Machines Essay
...Simple Machines Definitions: Machine - A device that makes work easier by changing the speed , direction, or amount of a force. Simple Machine - A device that performs work with only one movement. Simple machines include lever, wheel and axle, inclined plane, screw, and wedge. Ideal Mechanical Advantage (IMA)- A machine in which work in equals work out; such a machine would be frictionless and a 100% efficient IMA= De/Dr Actual Mechanical Advantage (AMA)- It is pretty much the opposite of IMA meaning it is not 100% efficient and it has friction. AMA= Fr/Fe Efficiency- The amount of work put into a machine compared to how much useful work is put out by the machine ; always between 0% and 100%. Friction- The force that resist motion between two surfaces that are touching each other. What do we use machines for? Machines are used for many things. Machines are used in everyday life just to make things easier. You use many machines in a day that you might take for granted. For example a simple ordinary broom is a machine . It is a form of a lever. Our country or world would never be this evolved if it wasn"t for machine . Almost every thing we do has a machine involved. We use machines ...
Simple Machine A machine with few Essay
... Simple Machine : A machine with few or no moving parts. Simple machines make work easier. Examples: Screw, Wheel and Axle, Wedge, Pulley, Inclined Plane, Lever Compound Machine : Two or more simple machines working together to make work easier. Examples: Wheelbarrow, Can Opener, Bicycle Inclined plane: A sloping surface, such as a ramp. Makes lifting heavy loads easier. The trade-off is that an object must be moved a longer distance than if it was lifted straight up, but less force is needed. Examples: Staircase, Ramp Lever: A straight rod or board that pivots on a point known as a fulcrum. Pushing down on one end of a lever results in the upward motion of the opposite end of the fulcrum. Examples: Door on Hinges, Seesaw, Hammer, Bottle Opener Pulley: A wheel that usually has a groove around the outside edge for a rope or belt. Pulling down on the rope can lift an object attached to the rope. Work is made easier because pulling down on the rope is made easier due to gravity. Examples: Flag Pole, Crane, Mini-Blinds Screw: An inclined plane wrapped around a shaft or cylinder. This inclined plane allows the screw to move itself or to move an object or material surrounding it when rotated. Examples: Bolt, Spiral Staircase Wedge: Two inclined planes joined back to back. Wedges are used to split things....
UXL Encyclopedia of Science
COPYRIGHT 2002 The Gale Group, Inc.
Machines, simple
A simple machine is a device for doing work that has only one part. Simple machines redirect or change the size of forces, allowing people to do work with less muscle effort and greater speed, thus making their work easier. There are six kinds of simple machines: the lever, the pulley, the wheel and axle , the inclined plane , the wedge, and the screw.
Everyday work
We all do work in our daily lives and we all use simple machines every day. Work as defined by science is force acting upon an object in order to move it across a distance. So scientifically, whenever we push, pull, or cause something to move by using a force, we are performing work. A machine is basically a tool used to make this work easier, and a simple machine is among the simplest tools we can use. Therefore, from a scientific standpoint, we are doing work when we open a can of paint with a screwdriver, use a spade to pull out weeds, slide boxes down a ramp, or go up and down on a see-saw. In each of these examples we are using a simple machine that allows us to achieve our goal with less muscle effort or in a shorter amount of time.
Earliest simple machines
This idea of doing something in a better or easier way or of using less of our own muscle power has always been a goal of humans. Probably from the beginning of human history, anyone who ever had a job to do would eventually look for a way to do it better, quicker, and easier. Most people try to make a physical job easier rather than harder to do. In fact, one of our human predecessors is called Homo habilis, which means "handy man" or "capable man." This early version of our human ancestors was given that name because, although not quite fully human, it had a large enough brain to understand the idea of a tool, as well as hands with fingers and thumbs that were capable of making and using a tool. Therefore, the first simple machine was probably a strong stick (the lever) that our ancestor used to move a heavy object, or perhaps it was a sharp rock (the wedge) used to scrape an animal skin, or something else equally simple but effective. Other early examples might be a rolling log, which is a primitive form of the wheel and axle , and a sloping hill, which is a natural inclined plane . There is evidence throughout all early civilizations that humans used simple machines to satisfy their needs and to modify their environment.
Words to Know
Compound machine: A machine consisting of two or more simple machines.
Effort force: The force applied to a machine.
Fulcrum: The point or support on which a lever turns.
Resistance force: The force exerted by a machine.
Work: Transfer of energy by a force acting to move matter.
The beauty of simple machines is seen in the way they are used as extensions of our own muscles, as well as in how they can redirect or magnify the strength and force of an individual. They do this by increasing the efficiency of our work, as well as by what is called a mechanical advantage. A mechanical advantage occurs when a simple machine takes a small "input" force (our own muscle power) and increases the magnitude of the "output" force. A good example of this is when a person uses a small input force on a jack handle and produces an output force large enough to easily lift one end of an automobile. The efficiency and advantage produced by such a simple device can be amazing, and it was with such simple machines that the rock statues of Easter Island , the stone pillars of Stonehenge, and the Great Pyramids of Egypt were constructed. Some of the known accomplishments of these early users of simple machines are truly amazing. For example, we have evidence that the builders of the pyramids moved limestone blocks weighing between 2 and 70 tons (1.8 and 63.5 metric tons) hundreds of miles, and that they built ramps over 1 mile (1.6 kilometers) long.
Trade-offs of simple machines
One of the keys to understanding how a simple machine makes things easier is to realize that the amount of work a machine can do is equal to the force used, multiplied by the distance that the machine moves or lifts the object. In other words, we can multiply the force we are able to exert if we increase the distance. For example, the longer the inclined plane— which is basically a ramp— the smaller the force needed to move an object. Picture having to lift a heavy box straight up off the ground and place it on a high self. If the box is too heavy for us to pick up, we can build a ramp (an inclined plane) and push it up. Common sense tells us that the steeper (or shorter) the ramp, the harder it is to push the object to the top. Yet the longer (and less steep) it is, the easier it is to move the box, little by little. Therefore, if we are not in a hurry (like the pyramid builders), we can take our time and push it slowly up the long ramp to the top of the shelf.
Understanding this allows us also to understand that simple machines involve what is called a "trade-off." The trade-off, or the something that is given up in order to get something else, is the increase in distance. So although we have to use less force to move a heavy object up a ramp, we have increased the distance we have to move it (because a ramp is not the shortest distance between two points). Most primitive people were happy to make this trade-off since it often meant being able to move something that they otherwise could not have moved.
Today, most machines are complicated and use several different elements like ball bearings or gears to do their work. However, when we look at them closely and understand their parts, we usually see that despite their complexity they are basically just two or more simple machines working together. These are called compound machines. Although some people say that there are less than six simple machines (since a wedge can be considered an inclined plane that is moving, or a pulley is a lever that rotates around a fixed point), most authorities agree that there are in fact six types of simple machines.
Lever
A lever is a stiff bar or rod that rests on a support called a fulcrum (pronounced FULL-krum) and which lifts or moves something. This may be one of the earliest simple machines, because any large, strong stick would have worked as a lever. Pick up a stick, wedge it under one edge of a rock, and push down and you have used a lever. Downward motion on one end results in upward motion on the other. Anything that pries something loose is also a lever, such as a crow bar or the claw end of a hammer. There are three types or classes of levers. A first-class lever has the fulcrum or pivot point located near the middle of the tool and what it is moving (called the resistance force). A pair of scissors and a seesaw are good examples. A second-class lever has the resistance force located between the fulcrum and the end of the lever where the effort force is being made. Typical examples of this are a wheelbarrow, nutcracker, and a bottle opener. A third-class lever has the effort force being applied between the fulcrum and the resistance force. Tweezers, ice tongs, and shovels are good examples. When you use a shovel, you hold one end steady to act as a fulcrum, and you use your other hand to pull up on a load of dirt. The second hand is the effort force, and the dirt being picked up is
the resistance force. The effort applied by your second hand lies between the resistance force (dirt) and the fulcrum (your first hand).
Pulley
A pulley consists of a grooved wheel that turns freely in a frame called a block through which a rope runs. In some ways, it is a variation of a wheel and axle, but instead of rotating an axle, the wheel rotates a rope or cord. In its simplest form, a pulley"s grooved wheel is attached to some immovable object, like a ceiling or a beam. When a person pulls down on one end of the rope, an object at the opposite end is raised. A simple pulley gains nothing in force, speed, or distance. Instead, it only changes the direction of the force, as with a Venetian blind (up or down). Pulley systems can be movable and very complex, using two or more connected pulleys. This permits a heavy load to be lifted with less force, although over a longer distance.
Wheel and axle
The wheel and axle is actually a variation of the lever (since the center of the axle acts as the fulcrum). It may have been used as early as 3000 b.c., and like the lever, it is a very important simple machine. However, unlike the lever that can be rotated to pry an object loose or push a load along, a wheel and axle can move a load much farther. Since it consists of a large wheel rigidly attached to a small wheel (the axle or the shaft), when one part turns the other also does. Some examples of the wheel and axle are a door knob, a water wheel , an egg beater, and the wheels on a wagon, car, or bicycle. When force is applied to the wheel (thereby turning the axle), force is increased and distance and speed are decreased. When it is applied to the axle (turning the wheel), force is decreased and distance and speed are increased.
Inclined plane
An inclined plane is simply a sloping surface. It is used to make it easier to move a weight from a lower to a higher spot. It takes much less effort to push a wheel barrow load slowly up a gently sloping ramp than it does to pick it up and lift it to a higher spot. The trade-off is that the load must be moved a greater distance. Everyday examples are stairs, escalators, ladders, and a ship"s plank.
Wedge
A wedge is an inclined plane that moves and is used to increase force— either to separate something or to hold things together. With a wedge, the object or material remains in place while the wedge moves. A wedge can have a single sloping surface (like a door stop that holds a door tightly in place), or it can have two sloping surfaces or sides (like the wedge that splits a log in two). An axe or knife blade is a wedge, as is a chisel, plow, and even a nail.
Screw
A screw can be considered yet another form of an inclined plane, since it can be thought of as one that is wrapped in a spiral around a cylinder or post. In everyday life, screws are used to hold things together and to lift other things. When it is turned, a screw converts rotary (circular) motion into a forward or backward motion. Every screw has two parts: a body or post around which the inclined plane is twisted, and the thread (the spiraled inclined plane itself). Every screw has a thread, and if you look very closely at it, you will see that the threads form a tiny "ramp"
that runs from the tip to the top. Like nails, screws are used to hold things together, while a drill bit is used to make holes. Other examples of screws are airplane and boat propellers.
In physics, a simple machine is any device that requires the application of only one force in order to perform work. Work is the product of the force applied and the distance moved due to the force. Most authorities list six kinds of simple machines: levers, pulleys, wheels and axles, inclined planes, wedges, and screws. One can argue, however, that these six machines are not entirely different from each other. Pulleys and wheels and axles, for example, are really special kinds of levers, and wedges and screws are special kinds of inclined planes.
Levers
A lever is a simple machine that consists of a rigid bar supported at one point, known as the fulcrum. A force called the effort force is applied at one point on the lever in order to move an object, known as the resistance force, located at some other point on the lever. A common example of the lever is the crow bar used to move a heavy object such as a rock. To use the crow bar, one end is placed under the bar, which is supported at some point (the fulcrum) close to the rock. A person then applies a force at the opposite end of the crow bar to lift the rock. A lever of the type described here is a first-class lever because the fulcrum is placed between the applied force (the effort force) and the object to be moved (the resistance force).
The effectiveness of the lever as a machine depends on two factors: the forces applied at each end and the distance of each force from the fulcrum. The farther a person stands from the fulcrum, the more his or her force on the lever is magnified. Suppose that the rock to be lifted is only one foot from the fulcrum and the person trying to lift the rock stands 2 yd (1.8 m) from the fulcrum. Then, the person’ s force is magnified by a factor of six. If he or she pushes down with a force of 30 lb (13.5 kg), the object that is lifted can be as heavy as 180 (6 x 30) lb (81 kg).
Two other types of levers exist. In one, called a second-class lever, the resistance force lies between the
effort force and the fulcrum. A nutcracker is an example of a second-class lever. The fulcrum in the nutcracker is at one end, where the two metal rods of the device are hinged together. The effort force is applied at the opposite ends of the rods, and the resistance force, the nut to be cracked open, lies in the middle.
In a third-class lever, the effort force lies between the resistance force and the fulcrum. Some kinds of garden tools are examples of third-class levers. When a person uses a shovel, for example, one holds the handle end steady to act as the fulcrum, while using the other hand to pull up on a load of dirt. The second hand is the effort force, and the dirt being picked up is the resistance force. The effort applied by the second hand lies between the resistance force (the dirt) and the fulcrum (the first hand).
Mechanical advantage
The term mechanical advantage is used to described how effectively a simple machine works. Mechanical advantage is defined as the resistance force moved divided by the effort force used. In the lever example above, for example, a person pushing with a force of 30 lb (13.5 kg) was able to move an object that weighed 180 lb (81 kg). So, the mechanical advantage of the lever in that example was 180 lb divided by 30 lb, or 6.
The mechanical advantage described here is really the theoretical mechanical advantage of a machine. In actual practice, the mechanical advantage is always less than what a person might calculate. The main reason for this difference is resistance. When a person does work with a machine, there is always some resistance to that work. For example, a mathematician can calculate the theoretical mechanical advantage of a screw (a kind of simple machine) that is being forced into a piece of wood by a screwdriver. The actual mechanical advantage is much less than what is calculated because friction must be overcome in driving the screw into the wood.
Sometimes the mechanical advantage of a machine is less than one. That is, a person has to put in more force than the machine can move. Class three levers are examples of such machines. A person exerts more force on a class three lever than the lever can move. The purpose of a class three lever, therefore, is not to magnify the amount of force that can be moved, but to magnify the distance the force is being moved.
As an example of this kind of lever, imagine a person who is fishing with a long fishing rod. The person will exert a much larger force to take a fish out of the water than the fish itself weighs. The advantage of the fishing pole, however, is that it moves the fish a large distance, from the water to the boat or the shore.
Pulleys
A pulley is a simple machine consisting of a grooved wheel through which a rope runs. The pulley can be thought of as a kind of lever if one thinks of the grooved wheel as the fulcrum of the lever. Then the effort force is the force applied on one end of the pulley rope, and the resistance force is the weight that is lifted at the opposite end of the pulley rope.
In the simplest form of a pulley, the grooved wheel is attached to some immovable object, such as a ceiling or beam. When a person pulls down on one end of the pulley rope, an object at the opposite end of the rope is raised. In a fixed pulley of this design, the mechanical advantage is one. That is, a person can lift a weight equal to the force applied. The advantage of the pulley is one of direction. An object can be made to move upward or downward with such a pulley. Venetian blinds are a simple example of the fixed pulley.
In a movable pulley, one end of the pulley rope is attached to a stationary object (such as a ceiling or beam), and the grooved wheel is free to move along the rope. When a person lifts on the free end of the rope, the grooved wheel and any attached weight slides upward on the rope. The mechanical advantage of this kind of pulley is two. That is, a person can lift twice as much weight as the force applied on the free end of the pulley rope.
More complex pulley systems can also be designed. For example, one grooved wheel can be attached to a stationary object, and a second movable pulley can be attached to the pulley rope. When a person pulls on the free end of the pulley rope, a weight attached to the movable pulley can be moved upward with a mechanical advantage of two. In general, in more complicated pulley systems, the mechanical advantage of the pulley is equal to the number of ropes that hold up the weight to be lifted. Combinations of fixed and movable pulleys are also known as a block and tackle . Some blocks and tackles have mechanical advantages high enough to allow a single person to lift weights as heavy as that of an automobile.
Wheel and axle
A second variation of the lever is the simple machine known as a wheel and axle . A wheel and axle consists of two circular pieces of different sizes attached to each other. The larger circular piece is the wheel in the system, and the smaller circular piece is the axle. One of the circular pieces can be considered as the effort arm of the lever and the second, the resistance arm. The place at which the two pieces is joined is the fulcrum of the system.
Some examples of the wheel and axle include a door knob, a screwdriver, an egg beater, a water wheel , the steering wheel of an automobile, and the crank used to raise a bucket of water from a well. When the wheel in a wheel and axle machine is turned, so is the axle, and vice versa. For example, when someone turn the handle of a screwdriver, the edge that fits into the screw head turns at the same time.
The mechanical advantage of a wheel and axle machine can be found by dividing the radius of the wheel by the radius of the axle. For example, suppose that the crank on a water well turns through a radius of 2 ft (61 cm) and the radius of the axle around which the rope is wrapped is 4 in (10 cm). Then, the mechanical advantage of this wheel and axle system is 2 ft divided by 4 in, or 6.
Inclined planes
KEY TERMS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compound machineA machine consisting of two or more simple machines.
Effort forceThe force applied to a machine.
FrictionA force caused by the movement of an object through liquid, gas, or against a second object that works to oppose the first object"s movement.
Mechanical advantageA mathematical measure of the amount by which a machine magnifies the force put into the machine.
Resistance forceThe force exerted by a machine.
Learn more about citation styles
Citation styles
сайт gives you the ability to cite reference entries and articles according to common styles from the Modern Language Association (MLA), The Chicago Manual of Style, and the American Psychological Association (APA).
Within the “Cite this article” tool, pick a style to see how all available information looks when formatted according to that style. Then, copy and paste the text into your bibliography or works cited list.
Because each style has its own formatting nuances that evolve over time and not all information is available for every reference entry or article, сайт cannot guarantee each citation it generates. Therefore, it’s best to use сайт citations as a starting point before checking the style against your school or publication’s requirements and the most-recent information available at these sites:
Notes:
- Most online reference entries and articles do not have page numbers.. However, the date of retrieval is often important. Refer to each style’s convention regarding the best way to format page numbers and retrieval dates.
- In addition to the MLA, Chicago, and APA styles, your school, university, publication, or institution may have its own requirements for citations. Therefore, be sure to refer to those guidelines when editing your bibliography or works cited list.
